Кабриолет Клуб България

Нека съберем колите без покрив под един покрив!
https://www.AutoDoc.Bg https://www.cabriozone.com
Дата и час: Чет Авг 18, 2022 12:00 pm

Часовете са според зоната UTC + 2 часа

Напиши нова тема Отговори на тема  [ 1 мнение ] 
Автор Съобщение
МнениеПубликувано на: Пет Ное 19, 2021 10:02 am 

Регистриран на: Пон Сеп 13, 2021 9:14 am
Мнения: 43
Skype: df
Автомобил: dff
Utilizing the metal surfaces of paint particles in conjunction with positively charged powder fired from a specific cannon, it is possible to achieve a metallic finish on the paint particles when electrostatic painting is used. It behaves in a similar way to a balloon that is drawn to a window opening in that it is drawn to and wraps itself around a grounded surface, such as a fence or other solid structure. This method allows for the formation of a uniform coating with little to no additional spraying or waste generation. It is also environmentally friendly. Additionally, it is environmentally friendly. Aside from that, it is also environmentally friendly.

This method can be used in the comfort of your own home or at your place of business, depending on your requirements, but it is most commonly used in the automotive sector. This material has been used in commercial applications in a variety of applications such as fences, railings, doors, and windows, all of which have been constructed from this material for a variety of reasons. According to the information that is currently available, transporting these massive objects to the powder coating workshop is a challenging undertaking. As a result of the low amount of overspray produced, less setting and cleaning will be required.
What exactly is Electrostatic paintingand how does it function in real-world situations are the two questions that must be addressed.

The way it works is that atomized particles are attached to a positively charged ion, which allows it to function. Static electricity will cause them to be drawn to a negatively charged metal that has been grounded, and this metal will act as a magnet, drawing them to it and keeping them there. Because of the electric charge, colorful particles adhere to the item in a manner similar to that of a static-charged balloon, and the charge distributes the particles evenly throughout the item.

As an added bonus, there is no mess, which is in contrast to traditional spray painting methods. In the case of on-site application of wet tones, the curing time can range between twelve and twenty-four hours, though it usually only takes a few hours for the toning to be completely dry after application.

Consider the following question: When comparing an electrostatic painting gun to an ordinary paintbrush, what makes the electrostatic painting gun more efficient than the ordinary paintbrush?

When the spray gun technology is combined with a grounded metal surface, the particles are charged by the spray gun technology, which causes them to be attracted to the grounded metal surface as a result of the charge on the particles. This process differs from traditional sprays in that the particles used in it adhere to surfaces of the objects that are to be coated in a manner similar to that of magnets adhering to ferrous metals. Traditional sprays have a significant disadvantage in this regard. As a result, less than 5% of the waste is generated at this point, which is an exceptional level of achievement.

The DISKElectrostatic painting set has piqued your interest, but it's difficult to pinpoint exactly what it is about it that has piqued your interest enough to want to purchase it.

It is possible to customize the automatic electrostatic coating machine from Disk to a great extent because it is made up of modular components.
S7, a Taiwanese manufacturer, claims that the atomizer has a high torque, low noise levels, and a constant energy balance, among other characteristics. Aside from that, it sprays with a fine mist and has a high paint rate (it can spray at speeds of up to 65,000 rpm when operating at maximum speed).

When in operation, it is powered by a Taiwanese high-voltage electrostatic generator, which is well-known for being both stable and long-lasting when in use.

Its frequency conversion control system, as well as the ability to digitally adjust both the oil volume and the paint discharge volume, are additional features of this particular paint gear pump.

An explosion-proof TEFLON coating tube, which was imported from the United States and is used in the coating process, is used in the process.

The elevator system is powered by a low-noise, one-horsepower variable speed motor that is stabilized by a Delta frequency converter.

Electric components for low-voltage applications are marketed in South Korea and Taiwan under the LG and Tiande brand names, respectively, according to the company.

Mitsui is the trademark of a Japanese company that specializes in the production of components whose functionality is controlled by a computer program, such as those used in electronic devices.

Върнете се в началото
Покажи мненията от миналия:  Сортирай по  
Напиши нова тема Отговори на тема  [ 1 мнение ] 

Часовете са според зоната UTC + 2 часа

Кой е на линия

Потребители разглеждащи този форум: 0 регистрирани и 1 госта

Вие не можете да пускате нови теми
Вие не можете да отговаряте на теми
Вие не можете да променяте собственото си мнение
Вие не можете да изтривате собствените си мнения

Иди на: